Tel: +86 010 64717508
Email : sales@capitalinstrument.com
About us Products center What is New

Knowledges Zone

Service Contact
 
Hardness testing
Force Measuring
Image measuring instrument
Thickness gauges
Coating testing
Roughness tester
Vibration testing
Concrete testing
Survey instruments
Flaw Detection
Material testing machine
Specimen Preparation
Other instruments
Infrared thermometer
Anti-covid19
 
Electronic universal testing machine CMT series with single beam
THE PREVIOUS
THE NEXT
  • (1) Technical structure of mechanism:
    The main frame is mainly made of foundation, two beams which have fixation function, one moving beam and portal frame which is made of two lead screws.
    Transmission loading system adopts alternating servo motor and timing belt speed reducers which drive high-precision ball screw to run to drive moving beam to realize loading.
    It has the characteristics of beautiful sculpt, good stability, high stiffness, high control accuracy, high-efficiency, low-noise and others.
    (2) Control and measure system
    This machine adopts the advanced DSC-10LG full digital closed loop control system to control and measure and adopts computer to process testing course and dynamic display
    of experimental curve and data processing. After testing, you can enlarge the curve to process reanalysis and editing of data through figure processing module.
    The performance of product reaches to international advanced level.
     
     
  •  Name and type of equipment
    CMT-1L Microcomputer control electronic universal testing machine
     Application of equipment
    This machine is applied in analysis and research of statics property testing of tensile, compression, bending, cutting, holding and other items of metal and nonmetal material (including composite material). It can achieve ReH, ReL, Rp0.2, Fm, Rt0.5 , Rt0.6, Rt0.65, Rt0.7Rm, E and other testing parameters automatically and can also do test and provide data according to GB, ISO, DIN, ASTM, JIS and other international standards.
    Main technical parameters
    (1) Measurement parameters
    1. Maximum test force: 1KN
    2. Accuracy class: 0.5
    3. Measuring range of test force: 0.4%100%FS full scale
    4. Indicating error of test force: within 0.5% of indicating value
    5. Resolution of test force: 1/200000 of maximum test force, up to 1/300000, grade unchanged and resolution unchanged in whole process
    6. Deformation measuring range: 0.2%100%FS
    7. Deformation indicating error: within 0.5% of indicating value
    8. Resolution of deformation: 1/200000 of maximum deformation, up to 1/300000
    9. Displacement indicating error: within 0.5% of indicating value
    10. Resolution of displacement: 0.025m
    2Control Parameters
    1. Tuning range of force control rate: 0.0055%FS/s
    2. Control accuracy of force control rate:
     When rate is less than 0.05%FS/s, within 2% of setting value
     When rate is no less than 0.05%FS/s, within 0.5% of setting value
    3. Tuning range of resolution rate: 0.0055%FS/s
    4. Control accuracy of resolution rate:
    When rate is less than 0.05%FS/s, within 2% of setting value
    When rate is no less than 0.05%FS/s, within 0.5% of setting value
    5. Tuning range of replacement rate: 0.001500mm/min
    6. Control accuracy of movement rate:
    When rate is less than 0.5mm/min, within 1% of setting value
    When rate is no less than 0.5mm/min, within 0.2% of setting value
     (3) Other parameters
    1. Effective distance of tension: 700mm
    2. Effective distance of compression: 700mm
    3. Size of host: 6503301730mm
    4. Electrical source power: 0.75kW, 220V, 50Hz
    5. Weight of host: about 150Kg
  • This machine is applied in analysis and research of statics property testing of tensile, compression, bending, cutting, holding
    and other items of metal and nonmetal material (including composite material). It can achieve ReH, ReL, Rp0.2, Fm, Rt0.5 , Rt0.6, Rt0.65, Rt0.7Rm, E and other testing parameters automatically and can also do test and provide data according to
    GB, ISO, DIN, ASTM, JIS and other international standards.
 
 
 Message to sales Department
Please send us your details and your particular request. By clicking the send button, your message will reach our sales department with priority.
First Name*
Last Name*
Company name*
Tel. nr.*
Email*
Comment*
Products center What is New Knowledges Zone Service
By range Global news FAQ Distributors
By application New instruments Application field Download
Article library Instruments support

Tel: +86 010 64717508
Fax: +86 010 58043762

Email : frank@capitalinstrument.com 

          sales@capitalinstrument.com

 
© Capitalinstrument.com 2012
Copyright© 2012 BEIJING CAP HIGH TECHNOLOGY CO.,LTD. All Rights Reserved. Powered by EnoICP11048927-1