Tel: +86 010 64717508
Email : sales@capitalinstrument.com
About us Products center What is New

Knowledges Zone

Service Contact
 You are here: Products center > Hardness testing > Micro-Vickers > MHVS-1000 PLUS
 
 Hardness testing
 Force Measuring
 Image measuring instrument
 Thickness gauges
 Coating testing
 Roughness tester
 Vibration testing
 Concrete testing
 Survey instruments
 Flaw Detection
 Material testing machine
 Specimen Preparation
 Other instruments
 Infrared thermometer
 Anti-covid19
 
 MHVS-1000 PLUS AOLONG CHIP Digital Auto Turret Micro Vickers Hardness Tester.
THE PREVIOUS
THE NEXT
  • Product introduction
     
    MHVS-1000 PLUS AOLONG CHIP Digital Auto Turret Micro Vickers Hardness Tester.
    It is a high-tech product of optoelectronic integration. The instrument is novel and beautiful, and it has good reliability, operability and intuition. It is an upgraded product of microhardness tester.   
    The machine uses computer software programming, high-power optical measurement system, optical sensing technology, and through 8-inch color touch screen input, it can adjust the intensity of the measuring light source, hold time, storage and so on. It also provides various hardness conversion tables for reference. It can display test methods and tests on LCD large screen display screen. Force, indentation length, hardness value, holding time of test force, number of times of measurement can be typed in year, month, day, test result and data processing, etc., and output by printer.            
    The hardness tester can be equipped with a photographic device, which can photograph the indentation and metallographic structure of the material. It is suitable for measuring the microhardness of small, thin-shaped and surface-infiltrated coatings and brittle materials such as glass, ceramics, agate and gemstone. It is a research institution, enterprise and quality inspection department. The ideal hardness testing instrument.
     
    Functional characteristics
    8 test forces, selection range: 10gf-1Kgf
    u Optical system: electronic eyepiece
    The eyepiece has a 10X magnification.
    High quality objective lenses for maximum comfort
    Adjustable optical path
    Double Channel Optical System
    Measurement confirmation key, mounted in electronic eyepiece
    Hardness value of test, automatic calculation, automatic display
    Automatic and accurate positioning of test points
    The hardness conversion control can be selected according to different materials.
    Technical parameters
    Model
    MHVS-1000 PLUS
    Test force
    10gf、25gf、 50gf、100gf、200gf、300gf、500gf、1kgf
    0.098N、0.245N、0.49N、0.98N、1.96N、2.94N、4.9N、9.8N
    Loading mode
    Automatic(Loading、Duration、Uploading)
    Objective lens and indenter conversion
    Automatic
    Testing mode
    HV
    Measuring the magnification of a microscope
    100X(Observe)
    400X(Measure)
    Hardness test range
    5-3000HV
    Dwell time
    0-60s
    D1\D2 value input
    Automatic
    Hardness reading
    Large screen LCD reading
    Data output
    Built-in printer,RS232 interface
    Executive Standard
    ISO6507、ASTM E384、JIS Z2244、GB/T 4340
    Scale conversion
    HRA、HRB、HRC、HR15N、HR30N、HR45N、HR15T、HR30T、HR45T、HK、HBW
    X-Y test-bed
    Size: 100×100mm、Route: 25×25mm、Resolution: 0.01mm
    Minimum Resolution
    0.1μm
    Maximum height of specimen
    100mm
    Maximum width of specimen
    100mm
    Power suuply
    AC220V+5%、50-60Hz
    Shape size
    520*320*560mm
    Machine net weight
    About 40kg
     
    Standard Configuration
     
    Name
    Quantity
    Name
    Quantity
    Weight shaft
    1
    Weights
    6
    XY test-bed
    1
    Slice clamping table
    1
    Flat-mouthed clamping table
    1
    Filament clamping table
    1
    screwdriver
    2
    Horizontal adjustment screw
    4
    Power cord
    1
    Vickers hardness block
    2
    10X micrometer
    1
    Manual book
    1
    Level
    1
     
     
    Product Qualification Certificate
    1
     
     
     
     
     
    Optional Accessories
     
    Vickers automatic measuring system
    HV-CCD
    Computert
    Mainstream configuration
    Printer
    Mainstream configuration
     
  • Product introduction
    MHVS-1000 PLUS AOLONG CHIP Digital Auto Turret Micro Vickers Hardness Tester.
    It is a high-tech product of optoelectronic integration. The instrument is novel and beautiful, and it has good reliability, operability and intuition. It is an upgraded product of microhardness tester.   
    The machine uses computer software programming, high-power optical measurement system, optical sensing technology, and through 8-inch color touch screen input, it can adjust the intensity of the measuring light source, hold time, storage and so on. It also provides various hardness conversion tables for reference. It can display test methods and tests on LCD large screen display screen. Force, indentation length, hardness value, holding time of test force, number of times of measurement can be typed in year, month, day, test result and data processing, etc., and output by printer.            
    The hardness tester can be equipped with a photographic device, which can photograph the indentation and metallographic structure of the material. It is suitable for measuring the microhardness of small, thin-shaped and surface-infiltrated coatings and brittle materials such as glass, ceramics, agate and gemstone. It is a research institution, enterprise and quality inspection department. The ideal hardness testing instrument.
     
    Functional characteristics
    8 test forces, selection range: 10gf-1Kgf
    u Optical system: electronic eyepiece
    The eyepiece has a 10X magnification.
    High quality objective lenses for maximum comfort
    Adjustable optical path
    Double Channel Optical System
    Measurement confirmation key, mounted in electronic eyepiece
    Hardness value of test, automatic calculation, automatic display
    Automatic and accurate positioning of test points
    The hardness conversion control can be selected according to different materials.
    Technical parameters
    Model
    MHVS-1000 PLUS
    Test force
    10gf、25gf、 50gf、100gf、200gf、300gf、500gf、1kgf
    0.098N、0.245N、0.49N、0.98N、1.96N、2.94N、4.9N、9.8N
    Loading mode
    Automatic(Loading、Duration、Uploading)
    Objective lens and indenter conversion
    Automatic
    Testing mode
    HV
    Measuring the magnification of a microscope
    100X(Observe)
    400X(Measure)
    Hardness test range
    5-3000HV
    Dwell time
    0-60s
    D1\D2 value input
    Automatic
    Hardness reading
    Large screen LCD reading
    Data output
    Built-in printer,RS232 interface
    Executive Standard
    ISO6507、ASTM E384、JIS Z2244、GB/T 4340
    Scale conversion
    HRA、HRB、HRC、HR15N、HR30N、HR45N、HR15T、HR30T、HR45T、HK、HBW
    X-Y test-bed
    Size: 100×100mm、Route: 25×25mm、Resolution: 0.01mm
    Minimum Resolution
    0.1μm
    Maximum height of specimen
    100mm
    Maximum width of specimen
    100mm
    Power suuply
    AC220V+5%、50-60Hz
    Shape size
    520*320*560mm
    Machine net weight
    About 40kg
     
    Standard Configuration
     
    Name
    Quantity
    Name
    Quantity
    Weight shaft
    1
    Weights
    6
    XY test-bed
    1
    Slice clamping table
    1
    Flat-mouthed clamping table
    1
    Filament clamping table
    1
    screwdriver
    2
    Horizontal adjustment screw
    4
    Power cord
    1
    Vickers hardness block
    2
    10X micrometer
    1
    Manual book
    1
    Level
    1
     
     
    Product Qualification Certificate
    1
     
     
     
     
     
    Optional Accessories
     
    Vickers automatic measuring system
    HV-CCD
    Computert
    Mainstream configuration
    Printer
    Mainstream configuration
     
  • Product introduction
    MHVS-1000 PLUS AOLONG CHIP Digital Auto Turret Micro Vickers Hardness Tester.
    It is a high-tech product of optoelectronic integration. The instrument is novel and beautiful, and it has good reliability, operability and intuition. It is an upgraded product of microhardness tester.   
    The machine uses computer software programming, high-power optical measurement system, optical sensing technology, and through 8-inch color touch screen input, it can adjust the intensity of the measuring light source, hold time, storage and so on. It also provides various hardness conversion tables for reference. It can display test methods and tests on LCD large screen display screen. Force, indentation length, hardness value, holding time of test force, number of times of measurement can be typed in year, month, day, test result and data processing, etc., and output by printer.            
    The hardness tester can be equipped with a photographic device, which can photograph the indentation and metallographic structure of the material. It is suitable for measuring the microhardness of small, thin-shaped and surface-infiltrated coatings and brittle materials such as glass, ceramics, agate and gemstone. It is a research institution, enterprise and quality inspection department. The ideal hardness testing instrument.
     
    Functional characteristics
    8 test forces, selection range: 10gf-1Kgf
    u Optical system: electronic eyepiece
    The eyepiece has a 10X magnification.
    High quality objective lenses for maximum comfort
    Adjustable optical path
    Double Channel Optical System
    Measurement confirmation key, mounted in electronic eyepiece
    Hardness value of test, automatic calculation, automatic display
    Automatic and accurate positioning of test points
    The hardness conversion control can be selected according to different materials.
    Technical parameters
    Model
    MHVS-1000 PLUS
    Test force
    10gf、25gf、 50gf、100gf、200gf、300gf、500gf、1kgf
    0.098N、0.245N、0.49N、0.98N、1.96N、2.94N、4.9N、9.8N
    Loading mode
    Automatic(Loading、Duration、Uploading)
    Objective lens and indenter conversion
    Automatic
    Testing mode
    HV
    Measuring the magnification of a microscope
    100X(Observe)
    400X(Measure)
    Hardness test range
    5-3000HV
    Dwell time
    0-60s
    D1\D2 value input
    Automatic
    Hardness reading
    Large screen LCD reading
    Data output
    Built-in printer,RS232 interface
    Executive Standard
    ISO6507、ASTM E384、JIS Z2244、GB/T 4340
    Scale conversion
    HRA、HRB、HRC、HR15N、HR30N、HR45N、HR15T、HR30T、HR45T、HK、HBW
    X-Y test-bed
    Size: 100×100mm、Route: 25×25mm、Resolution: 0.01mm
    Minimum Resolution
    0.1μm
    Maximum height of specimen
    100mm
    Maximum width of specimen
    100mm
    Power suuply
    AC220V+5%、50-60Hz
    Shape size
    520*320*560mm
    Machine net weight
    About 40kg
     
    Standard Configuration
     
    Name
    Quantity
    Name
    Quantity
    Weight shaft
    1
    Weights
    6
    XY test-bed
    1
    Slice clamping table
    1
    Flat-mouthed clamping table
    1
    Filament clamping table
    1
    screwdriver
    2
    Horizontal adjustment screw
    4
    Power cord
    1
    Vickers hardness block
    2
    10X micrometer
    1
    Manual book
    1
    Level
    1
     
     
    Product Qualification Certificate
    1
     
     
     
     
     
    Optional Accessories
     
    Vickers automatic measuring system
    HV-CCD
    Computert
    Mainstream configuration
    Printer
    Mainstream configuration
     
  •  
    Standard Configuration
     
    Name
    Quantity
    Name
    Quantity
    Weight shaft
    1
    Weights
    6
    XY test-bed
    1
    Slice clamping table
    1
    Flat-mouthed clamping table
    1
    Filament clamping table
    1
    screwdriver
    2
    Horizontal adjustment screw
    4
    Power cord
    1
    Vickers hardness block
    2
    10X micrometer
    1
    Manual book
    1
    Level
    1
     
     
    Product Qualification Certificate
    1
     
     
     
     
  •  
     
    Optional Accessories
     
    Vickers automatic measuring system
    HV-CCD
    Computert
    Mainstream configuration
    Printer
    Mainstream configuration
 
 
 Message to sales Department
Please send us your details and your particular request. By clicking the send button, your message will reach our sales department with priority.
First Name*
Last Name*
Company name*
Tel. nr.*
Email*
Comment*
Products center What is New Knowledges Zone Service
By range Global news FAQ Distributors
By application New instruments Application field Download
Article library Instruments support

Tel: +86 010 64717508
Fax: +86 010 58043762

Email : frank@capitalinstrument.com 

          sales@capitalinstrument.com

 
© Capitalinstrument.com 2012
Copyright© 2012 BEIJING CAP HIGH TECHNOLOGY CO.,LTD. All Rights Reserved. Powered by Eno 京ICP备11048927号-1