Tel: +86 010 64717508
Email : sales@capitalinstrument.com
About us Products center What is New

Knowledges Zone

Service Contact
 You are here: Products center > Roughness tester > Roughness tester > ART6210
 
 Hardness testing
 Force Measuring
 Image measuring instrument
 Thickness gauges
 Coating testing
 Roughness tester
 Vibration testing
 Concrete testing
 Survey instruments
 Flaw Detection
 Material testing machine
 Specimen Preparation
 Other instruments
 Infrared thermometer
 Anti-covid19
 
 Roughness tester ART6210
THE PREVIOUS
THE NEXT
  •  Simple operation, 

    overall function, 
    fast measurement, 
    accuracy stability,  convenience 

    1.FEATURES

    This instrument is compatible with four standards of  site to measure surface roughness of various machinery-processed parts, calculate corresponding and clearly display all measurement parameters.

    When measuring the roughness of a surface, the sensor is placed on the surface and then uniformly slides along 

    the surface by driving the mechanism by the sharp built-in probe. This roughness causes displacement of the probe which results in change of inductive amount 

    of induction coils so as to generate 

    analogue signal, which is in proportion to the surface roughness at output end of phase-sensitive rectifier. The exclusive DSP processes and calculates and then 

    outputs the measurement results on LCD. 

    * Multiple parameter measurement: Ra, Rz, Rq, Rt

    * Highly sophisticated inductance sensor

    * Four wave filtering methods : RC, PC-RC, GAUSS and D-P

    * Built-in lithium ion rechargeable battery and control circuit with high capacity

    * Small in size, light in weight and easy to use

    * Can communicate with PC computer for statistics, printing and analyzing by the optional cable and the

     software for RS232C interface.

    *Manual or automatic shut down. The tester can be switched off  by pressing  the Power key at any time. 

    On the other hand, the tester will power itself off about 5 minutes after the last  key operation.

    *The tester can memorize 7 groups of measurement results and measuring conditions for later use or download to PC.

    *Metric /Imperial Conversion

  • 2SPECIFICATIONS

    Display: 4 digits, 10 mm LCD, with blue backlight

    Parameters:  Ra, Rz, Rq, Rt

    Measuring Range 

               Ra, Rq:  0.005-16.00um/0.020-629.9uinch

               Rz,Rt:   0.020-160.0um/0.780-6299uinch

    Accuracy: ≤±10%

    Fluctuation of display value: Not more than 6%

    Sensor : 

             Test Principle: Inductance type

             Radius of Probe Pin: 5um

             Material of Probe Pin: Diamond

             Dynamo-measurement of Probe: 4mN(0.4gf)

             Probe Angle: 90°

             Vertical Radius of Guiding Head: 48mm

    Maximum driving stroke:  17.5mm/0.7inch

    Cutoff length (l): 0.25mm / 0.8mm / 2.5mm  optional

    Evaluation length:  5l

    Driving speed: 

             sampling length = 0.25mm   Vt=0.135mm/s

             sampling length = 0.8mm    Vt=0.5mm/s

             sampling length = 2.5mm    Vt=1mm/s

             returning  Vt=1mm/s

    Profile digital filter

             Filtered Profile:            RC

             Filtered Profile:            PC-RC

             Filtered Profile:            Gauss

             Non-Filtered Profile:        D-P

    Resolution : .001μm    if reading 10μm  0.01μm    

                        if 10μm≤reading100μm        0.1μm    if reading ≥100μm      

    Evaluation length : 5 cut-off

    Power Li-ion battery: rechargeable

    Operating conditions:  Temp. 0~50℃

                           Humidity <80% 

    Size140x57x48 mm  (5.5x2.2x1.9 inch)     

    Weight: about 420 g

  • 1.  Manufacture of cars and spare parts

    2.  Manufacture of mechanical parts and gearing

    3. Facilities for metal processing and accessories and functional parts of lathe

    4. Equipments of technics

    5.  Universal machine and metal molding equipment,

    Cane, air presser, valve, pump, fan, cooler, cool rolling mill, rivet machine, metallic products.

    6. Treatment of the surface

  • Standard Delivery                                
    ART6210 Unit  
    Standard sensor 
    Model for multi-standard groove 
    Power adapter         
 
 
 Message to sales Department
Please send us your details and your particular request. By clicking the send button, your message will reach our sales department with priority.
First Name*
Last Name*
Company name*
Tel. nr.*
Email*
Comment*
Products center What is New Knowledges Zone Service
By range Global news FAQ Distributors
By application New instruments Application field Download
Article library Instruments support

Tel: +86 010 64717508
Fax: +86 010 58043762

Email : frank@capitalinstrument.com 

          sales@capitalinstrument.com

 
© Capitalinstrument.com 2012
Copyright© 2012 BEIJING CAP HIGH TECHNOLOGY CO.,LTD. All Rights Reserved. Powered by Eno 京ICP备11048927号-1